| |
| Home > Media > MAZDA has the largest, most complete selection of pipeline Desuperheaters |
| |
| Media |
| |
| |
| MAZDA has the largest, most complete selection of pipeline Desuperheaters |
| |
 |
Double Ventiri Desuperheater |
| |
| Venturi Desuperheater |
 |
| |
 |
Laval Jet Atomising Desuperheater |
| |
| Mini Venturi Desuperheater |
 |
| |
 |
Attemperator Desuperheater |
| |
| In-Line Venturi Desuperheater |
 |
| |
 |
Variable Nozzle Spray Desuperheater |
| |
| Multi Nozzle (orifice) Lancer Desuperheater |
 |
| |
| |
|
|
| Recommended Installation Practice For Pipeline Desuperheaters |
| |
 |
| |
| NOTE: |
| |
- SPRAY WATER CONTROL VALVE SHOULD BE LOCATED AS CLOSE TO THE DESUPERHEATER AS POSSIBLE.
- TEMP SENSOR SHOULD BE INSERTED SUCH THAT IT IS EXPOSED TO STEAM FLOW TO OBTAIN AN EVEN TEMPERATURE CONTROL.
- IN CASE REQUIRED STRAIGHT DISTANCE AFTER THE DESUPERHEATER IS NOT AVAILABLE AS INDICATED, CONSULT OFFICE.
- PRESSURE AND TEMPERATURE SENSORS SHOULD BE LOCATED AS CLOSE TO POINT OF USAGE AS POSSIBLE, BUT BEFORE STEAM DISTRIBUTION.
- BLRF FLANGE INDICATED AT CATCH POCKET SHOULD BE OPENED FOR CLEANING OF WELDING BITS, PIPE MUCK AND DIRT DURING SHUTDOWN.
|
| |
